The Cody Corner to Corner Blanket

When I’m looking for a new project, I usually fall into two camps- trying something I’ve never experienced before (new yarn, new stitches, new construction), or a simple project that I can do almost without thinking. This lovely blanket falls into the second category for me, and it was a relaxing pleasure to work on. It has: one stitch throughout, no color changes, only a few ends to weave in, and it can be easily customized to any size you want. It doesn’t get any easier than that!

The only technique you need to be familiar with is Corner to Corner crochet. This is done using a set of double crochets and chains, and once you get the hang of it you’ll be flying through this project. It’s actually the one stitch I can do consistently without looking, so I’m able to bring projects like this on road trips and not get carsick!

The optional border is still using double crochets, but you’ll grab a contrasting colored yarn and make a nice ribbed edge by working front and back post DC’s. Don’t worry, I have all the picture tutorials you need to make this blanket. Just grab your striped yarn and let’s get started!

-850 yards of worsted yarn- suggested Lion Brand Mandala Tweed Stripes (2 skeins)- Pictured is Wish Bone
-100 yards of worsted yarn in contrasting color for border- Pictured Lion Brand Basic Stitch in Charcoal
Size J/10 6mm hook, or size needed to obtain gauge

Stitch abbreviations:
-Chain (CH)
-Double Crochet (DC)
-Corner to Corner (C2C)
-Back Post Double Crochet (BPDC)
-Front Post Double Crochet (FPDC)

Gauge: 3” by 3” = 4×4 squares
Measurements: Blanket with border 36” by 36”, 44×44 squares

Notes: This blanket is easily customizable by continuing the base to the desired length before starting to decrease. Any yarn and hook can be used, but I recommend creating a 4×4 square gauge to determine how many squares you’ll need for the full blanket.


See photos below pattern for step-by-step C2C instructions.
Using striped yarn, begin C2C pattern. Continue until base sides reach 44×44 squares before decreasing, or continue until desired size. Fasten off and continue to border.

See pictures for more details.
Attach contrasting yarn to one corner of blanket. CH 3, DC 2 in CH 3 space. Continue to DC across, making 3 DC in each block.

After final DC of the row, CH 3. Work 2 DC in the last DC of the row. Turn and work 3 DC in each block across next side. Repeat corner (CH 3, DC 2 in last DC of row).

After the last corner is turned, SL ST into 1st CH 3 of the border foundation row. CH 2. Alternate FPDC and BPDC in each DC. After last FP or BP of the side, CH 3, turn, and continue FP/BP in each DC across. The CH 3 will create the corner.

Continue around until reaching the beginning CH 2. SL ST into CH 2 space. CH 2 and make 2-3 more rows of Fp/BP border. F/O and weave in ends.

Corner to Corner Pictorials:

Border Pictorials:

This is an original pattern by Christina of February Sky Designs. Please do not claim this pattern as your own. If you wish to share this pattern, you may link to it but please do not reprint it on your site or sell it.

You may sell products made from this pattern but please clearly credit the design to me, Christina of February Sky Designs, and link to my blog Thank you for respecting creators and their work!

Move Mountains Baby Blanket

I got a text from one of my good friends showing me the beautiful mountain mural she’d put up in the nursery for the baby boy she’s expecting in a couple months. She lives far from me and I knew I wanted to send her a baby care package that included a crochet blanket using the colors in the mural. After browsing through some baby blanket patterns on Pinterest I had an idea- what if I not only incorporated the colors of the mural into the blanket, but the design as well? And so, the Move Mountains baby blanket was born!

“Kid, you’ll move mountains!”- Dr. Seuss
This is the picture she sent me of the nursery! Mountain decal purchased from PearlWall’s Etsy shop.

I had never made a blanket like this before and knew I’d need a visual to keep track of when I should be adding my colors. I used the website Stitch Fiddle to design a template for my blanket, and after a lot of trial and error this was what I came up with:

The blanket is worked entirely in single crochet and is 60 stitches across by 70 rows tall. The finished blanket came out to 36 inches by 32 inches using super bulky yarn and a size P hook.

The trickiest part of the blanket is knowing how to do the color changes correctly. Once you count your stitches and know where you’re supposed to be starting a new color you begin your single crochet in the stitch before the first stitch of the new color, and instead of finishing the single crochet with the first color you pull in the new color to finish it. Then you single crochet with the new color in the next stitch, which is your first stitch of the new color.

Here I was finishing with the light gray yarn and before completing my SC I would pull up the navy blue yarn to finish it and then continue on with the blue yarn, leaving the light gray strand until I came back to it in the next row.

By increasing or decreasing one stitch of a color, depending on where you are in the pattern, your colors will move up and down diagonally and create the mountain slopes.

If you want to cut back on the number of ends you need to weave in, like I always try to do, you’ll be working with multiple balls of yarn at once, picking them up and dropping them as you move across the rows.

Stitch abbreviations:

  • SC = single crochet
  • CH = chain


3 skeins each of-

Lion Brand Hometown USA Yarn – San Diego Navy


Lion Brand Hometown USA Yarn Dallas Grey


Lion Brand Yarn Hometown USA Yarn Springfield Silver


Crochet Hook, Size P-15, 10mm


Large-Eye Sewing Needle



Chain 61

Row 1: Using Color A (dark gray), SC in the 2nd stitch from the hook and continue across. 60 SC.

R2-10: CH 1 (does not count as SC), turn. SC across.

R11:  CH 1, turn. SC across until there are two stitches from the end. Join Color B (navy blue) in SC 59 and do one SC of Color B in SC 60.

R12:  CH 1, turn. SC with Color B in first stitch. Start the SC in the second stitch and pick up Color A yarn to finish. SC across with Color A.

R13:  CH 1, turn. SC with Color A across until the 4th stitch from the end (SC 57). Pick up Color B and SC to end.

R14:  CH 1, turn. SC with Color B for three stitches. Start 4th SC and join Color A. SC across with Color A for 18 stitches. Join a second skein of Color B for one SC. Don’t finish the SC of Color B, but add a second skein of Color A and SC across to the second to last stitch. Join the 3rd skein of Color B and SC the last stitch.

R15-23:  CH 1, turn. Continue to SC with Colors A and B, increasing Color B and decreasing Color A one SC on each side of the mountain peaks with each row.

R24:  CH 1, turn. SC across, dropping 2nd Color B skein and continuing with 1st skein until Color A change.

R25-31:  CH 1, turn. Continue decreasing Color A.

R32-36:  CH 1, turn. SC across with Color B.

R37:  CH 1, turn. SC across with Color B for 15 stitches. Join with Color C (light gray) for one SC, join 2nd ball of Color B, SC across to SC 49, join 2nd skein of Color C, SC one and join 3rd skein of Color B. SC with Color B until second to last stitch, join 3rd skein of Color C, SC one.

R38-53:  CH 1, turn. SC across, decreasing Color B by one on each side of the mountain peaks until they all reach their tops.

R54-70:  CH 1, turn. SC across with Color C.

Note: Be sure to consult the stitch chart for help with color changes and row numbers!

I’ll be mailing the blanket this week, along with a onesie I found with little mountains on it (gotta love a theme!). I love how this blanket came out and I can’t wait to see pictures of it in the nursery and especially with her little boy!

This is an original pattern by Christina of February Sky Designs.  Please do not claim this pattern as your own. If you wish to share this pattern, you may link to it but please do not reprint it on your site or sell it.
You may sell products made from this pattern but please clearly credit the design to me, Christina of February Sky Designs, and link to my blog Thank you for respecting creators and their work!

***This post contains affiliate links. Thanks for your support!

Rustic Baby Shower for a Little Lady

Becky Collage

I recently made decorations for a party that I could not attend, as I did with Erin’s Graduation. This time, it was for a baby shower being held at the home of the grandparents-to-be. The parents, Becky and Zack, would both be attending, so although they are having a little girl I knew I didn’t want to make the decorations overly feminine. I chose a rustic floral theme for the couple, who I know love nature and the outdoors.

Because all the decorations needed to be portable and easily set up, I went with a lot of light-weight items that would make a big impact.

(Note- Pictures courtesy of my friend CC)

Congratulations banner made from burlap and painted letters.



(My favorite item!) A mobile wrapped with juniper berries and hung with origami paper leaves.



Wishes for Baby cards made with card stock and ribbon. The little leaf photo album is great to hold the cards once the guests write their messages!



I made these bottle wraps using burlap, ribbon and the juniper berries from the mobile. They are tied to the bottle with ribbon!



And, finally, some cheerful tassel garland made with tissue paper. (I spy a picture of little Luna love!)


Congratulations to the parents-to-be!